Extreme Flight - 67 inch Extra 300

Legendary. Not many RC aircraft deserve that description. The Extreme Flight Extra 300 does.

For over 20 years, the EF Extra 300 has been at the front of aerobatics, renewed with each leap forward in RC technology. Each version gets better and better, and delivers that famous smoothness and precision the design has alway been known for.

Now the 67 inch Extra 300 is here, the next release in this new generation. It is superb, and will amaze you. Perfect figures. Brilliant stability in wind.

Light wingtips and rigid structure give you snaps that start and stop effortlessly and right on the money. Low, low coupling makes your knife edge and blended manoeuvres ultra precise. Drag this plane past you slowly in high-alpha knife edge...it's gorgeous.

Then drop into your 3D routine. The Extra has perfect manners and is very willing to play. Harrier, upright and inverted, is breathtakingly stable. Plant it in hover and it stays. The rudder is super effective and the elevator gives tight rotations.

Massive thrust from the matched T-Motor AM670 power system gives you not just unlimited vertical, but strong acceleration through your upline figures.

The Extra 300 has all of the tech Extreme Flight 67 inch planes are now famous for. Radically light and extremely strong, the 67's deliver performance you won't believe until you fly one. Carbon is integrated into the laminated wood structure to handle all the G forces you can throw at it. Carbon main wing tube and landing gear, pre-fit cowl, dual canopy latches, competition-grade hardware...there is nothing left to upgrade. It's all here, and it makes assembly super quick and easy.

Covered in genuine Oracover/Ultracote in HOT new colour schemes designed by Matt Stringer, the Extra is ready to make this season your best ever in RC. One 6S 4000-5000mah pack gives you outer-limits performance. Try it. You'll be amazed. It's truly legendary.

Got RxR?

Want all of this performance in about hour, box-to-flight? Check out the RxR version with all the recommended components already installed. Experience an Extreme Flight RxR - the best aircraft with the best components, receiver-ready out of the box!

Features:

• Latest Generation CNC locks for fast and secure wing assembly
• Pre-Installed cooling baffles and moulded negative pressure lip
• Pre-Installed air dam and pre-cut exit air for maximum airflow control through the fuse
• Finished canopy floor and dash, ready to accept 115mm pilot of your choice
• Quick install SFG's with machined thumb bolts
• Expertly applied genuine Ultracote covering material
• Pin hinges pre-glued on all surfaces
• Ailerons and elevators hinge gaps sealed
• Single wire rudder install for easy assembly
• Carbon Fibre landing gear and tailwheel assemblies
• Paint matched Cyclone spinner INCLUDED
• Bubble style wing bag with pockets for SFG's and wing tube INCLUDED

Specifications

• Wingspan: 67 inch (1,702mm)
• Length: 67 inch (1,702mm)
• Weight: 8 lbs (3.6kg)
• Wing area: 864 sq in (55.7 dm²)
• Spinner: 76mm (included)
• Pilot: 115mm X2 or Pilot X (optional)
• Centre of gravity: centre of the wing tube for maiden, sport and precision

Recommended Set-up

Electric:

• Motor: T-Motor AM670
• ESC: T-Motor AM116
• Battery: 6S 4000-5000mAh (600-750g) LiPo
• Prop: 18x8 carbon

Servos, Arms & Extensions:

• 4x EF/Theta 989 or Savox 1261 servos
• 4x Extreme Flight 1.25 inch lightweight servo arms (2mm) – ailerons, rudder and elevator
• 2x Extreme Flight 28 AWG 6 inch extensions – Rx to ailerons
• 2x Extreme Flight 28 AWG 24 inch extensions – elevator and rudder

Shop the hardware: Extreme Flight servo arms · 28 AWG servo extensions

Downloads

• Extreme Flight Spec Sheet (PDF)
• Instruction Manual / Build Guide (PDF)

All Extreme Flight products in the UK are supplied by AerobatX - Official & Exclusive UK Importer and Distributor for Extreme Flight R/C