Extreme Flight - 60 inch Slick 580

The evolution of our legendary Slick design continues with the release of the updated 60 inch Slick 580 CNC! Low and slow or fast and aggressive, the new Slick is well tested and highly refined, informed by close to a decade of experience with this airframe. Featuring a carbon reinforced skeleton and two eye-catching Ultracote schemes, the Slick 580's appearance matches its incredible performance. Paired with T-Motor power combo and a 6S 3300-4000 mah battery, the Slick is a lethal 3D/XA weapon to add to your arsenal!

The removable wing panels are mounted on a carbon fibre wing tube and are fastened to the fuselage with our newest CNC quick locking wing latch system. New tail assembly allows EASY installation for the best results with the least amount of effort. All control surfaces are pushrod driven with short linkages and use ball links for slop free actuation with no binding. Optional quick assembly side force generators are included and add to the already generous side area, increasing yaw axis authority and adding stability in all angles of sideslip.

Ailerons and elevator prehinged and sealed. 63mm cyclone spinner included. Expertly painted fiberglass cowl and wheel pants in 2 gorgeous high visibility Ultracote colour schemes add the finishing touches and make this an airplane that you will be proud to show up at the flying field with. Couple the Slick with the T-Motor AM600 combo and be prepared for ballistic vertical performance!

Got RxR?

Want all of this performance in about hour, box-to-flight? Check out the RxR version with all the recommended components already installed. Experience an Extreme Flight RxR - the best aircraft with the best components, receiver-ready out of the box!

Features:

• Latest Generation CNC locks for fast and secure wing assembly
• Finished canopy floor and dash, ready to accept 115mm pilot of your choice
• Quick install SFG's with machined thumb bolts
• Expertly applied genuine Ultracote covering material
• Pin hinges pre-glued on all surfaces
• Ailerons and elevators hinge gaps sealed
• Carbon Fibre landing gear and tailwheel assemblies
• Paint matched Cyclone spinner INCLUDED
• Bubble style wing bag with pockets for SFG's and wing tube INCLUDED

Specifications

• Wingspan: 60 inch (1,524mm)
• Length: 58 inch (1,473mm)
• Weight: 6-6.5 lbs (2.7-2.9kg)
• Wing area: 670 sq in (43.2 dm²)
• Spinner: 63mm
• Centre of gravity: rear edge of the wing tube (maiden flight)

Recommended Set-up

Electric:

• Motor: T-Motor AM600 or Xpwr 22cc
• ESC: T-Motor AM116, Castle Talon 90 or Avian 100
• Prop: 16x8 carbon electric (AM600) or 16x7-16x8 carbon/wood electric (Xpwr 22cc)

Servos, Arms & Extensions:

• 4x mini metal gear servos: Theta 989, MKS HV-747, Savox SV-1260MG or Hitec HS-7245MH
• 4x Extreme Flight 1.25 inch servo arms
• 2x Extreme Flight 28 AWG 24 inch extensions
• 2x Extreme Flight 28 AWG 3 inch extensions

Shop the hardware: Extreme Flight servo arms · 28 AWG servo extensions

Downloads

• Extreme Flight Spec Sheet (PDF)
• Instruction Manual / Build Guide (PDF)

All Extreme Flight products in the UK are supplied by AerobatX - Official & Exclusive UK Importer and Distributor for Extreme Flight R/C