Water thin viscosity means that Insta-Cure will wick deep into a joint by capillary action and set within seconds. Surfaces to be bonded should be accurately fitting and should be kept in tight contact while curing takes place. The CA can be applied around the edges of the join and will penetrate by capillary action. Because of its capacity to penetrate finely porous surfaces Insta-Cure is ideal for bonding balsa wood as it penetrates into the wood producing a join that is more substantial than just purely a surface bond.

Directions : 

Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure - CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure - along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.

Works Best On: