SUPER-GOLD - and SUPER-GOLD+ - are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™'s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF's. They will not fog clear plastic. SUPER-GOLD+ - is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE - is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD + - in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET - to one piece and apply SUPER-GOLD+ - to the other before joining. Excess INSTA-SET - may create too much heat, which can melt the foam. Both SUPER-GOLD™'s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD - eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Directions : 

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Super-Gold+ - CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set - accelerator must be used when bonding two pieces of foam together. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.