• Futaba 6k V2

 

6K V2
8-Channel 2.4GHz Computer Radio System


Updated Version 2 offers 8 channels of control!

To get the most radio for your money, check out the new 6K — an easy-to-program flight system with versatile functions that include telemetry, S.Bus/S.Bus2 compatibility and 30 model memory. With Version 2 updates, it's now a better value than ever. The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.

New in the 6K Version 2:

Two additional channels

  • Channels 7/8 are used through the R3006SB receiver's S.Bus/S.Bus2 ports
  • Allow for expansions or adding accessories
  • Can be assigned to any of the four switches or VR dial
  • Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer

Expanded Flight Modes (Fly Mod) in multicopter programming

  • Priority — toggle through five different values assigned to flight modes on an assigned channel
  • Matrix — up to nine combinations using two, 3-position switches for controlling gimbals

Vibration alerts with timer functions and Throttle Integrate

SBS-01C current sensor and SBS-01V voltage sensor compatible



2.4GHz S-FHSS2.4GHz T-FHSS Telemetry SystemS.Bus logoS.Bus2 logo

R3006SBThe included R3006SB receiver has six standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors.
Version 26K 8-Channel 2.4GHz Computer Radio System FUTK6100

Owners of 6-channel 6K systems — download the free Version 2 firmware update





The versatile 6K meets the control needs of a wide range of R/C pilots!



Program navigation is easy and intuitive with the jog dial, +/- pads and end pad.


internal antenna

The 6K is a full-range system. Its antenna is inside the transmitter case for safety and convenient handling.

variable rate dial and speaker vents

This variable rate dial can be programmed for a variety of functions. A speaker provides audible alerts and cues for navigating the programming menus.

switches

Four assignable switches (three 3-position and one 2-position) offer maximum flexibility.

Priority flight conditions screenshots (3)

6K Version 2 multicopter programming has been expanded with five Priority and nine Matrix flight conditions.

Matrix flight conditions screenshots (3)

The nine Matrix flight conditions can be used to set up a tilt camera by assigning nine settings to two 3-position switches. 

SBS-01C [FUTM0860] and SBS-01V [FUTM0855]

Using an SBS-01V External Voltage Telemetry Sensor and SBS-01C Current Telemetry Sensor, the 6K collects real time telemetry data for motor current, battery voltage and capacity. (not included)
 

System features

  • Airplane, Helicopter, Glider and Multicopter programming
  • S-FHSS/T-FHSS selectable
  • Telemetry system (T-FHSS) with data speech (via earphones) function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer, current, capacity and voltage
  • Built-in antenna (Full Range)
  • S.Bus/S.Bus2 servo setting functions programmable through the transmitter
  • Preset vibration alarms
  • 30 model memory
  • 8-character model/user naming
  • Programmable mixes (3-normal, 1-curve) for airplanes, helicopters, gliders and multi-rotors
  • Digital trims with variable step settings
  • Adjustable stick length and tension
  • Changeable switch/VR position and AUX channel function
  • Throttle position warning
  • Backlit 128x64 DOT LCD screen with adjustable display contrast
  • Software updateable through the CIU-2 or CIU-3 interface units
  • Screen Lock
  • Earphone/S.Bus/Trainer jacks
  • Assignable switches (three 3-position, one 2-position)
  • Range Check
  • Program navigation bay with jog dial, +/- pads and end pad
  • Data reset
  • Model copy
  • Selectable model type
  • Fail Safe
  • End Points
  • Trim/Trim Resets/Trim Steps
  • Sub Trim
  • Servo Reversing
  • Parameter functions
  • Servo monitor/Test
  • Wireless model data transfer (to other T6K transmitters)
  • Timer-System and Model (Up/Down/Down-Stop/THR Integrate) w/Vibration Alert
  • Trainer system
  • Power Saver

Airplane Functions

  • Wing Type (5-wing, 2-tail)
  • Throttle Cut
  • Dual Rate/Expo
  • Throttle Curve
  • Idle down
  • Gyro
  • Aileron differential
  • V-Tail
  • Camber
  • Air Brake
  • Elevator-to-Flap mixing
  • Flap-to-Elevator mixing
  • Elevon mixing

Glider Functions

  • Wing Type (5-Wing, 2-Tail)
  • Condition select
  • Dual Rate/Expo
  • Motor switch
  • Gyro
  • Aileron Differential
  • V-tail
  • Butterfly mixing
  • Trim mixing
  • Elevator-to-Camber mixing
  • Camber mixing
  • Aileron-to-Camber mixing

Helicopter Functions

  • Swash type (6)
  • Condition Select
  • Throttle Cut
  • Dual Rate/Expo
  • Trim Offset
  • Delay
  • Gyro mixing
  • Swash AFR
  • Swash mixing
  • Throttle Curve (5-point)
  • Pitch Curve (5-point)
  • Pitch-to-Rudder mixing
  • Throttle Hold
  • Hovering throttle
  • Hovering pitch

Multicopter Functions

  • Flight Mode
  • Center alarm
  • Dual Rate/Expo
  • Throttle Curve
  • Throttle Delay
  • Gyro

Six Languages

  • English
  • German
  • French
  • Spanish
  • Italian
  • Dutch

 Click stock numbers for Tech Notes
Stock #SystemBandReceiverServo(s)
FUTK61006KAT-FHSS 2.4GHzR3006SB
FUTK61106KHT-FHSS 2.4GHzR3006SB

Requirements:

  • 4 "AA" cells
  • Servos

Transmitter Specifications:

Type
2-stick, T-FHSS/S-FHSS selectable
Channels
8 (channels 7/8 are used through the receiver S.Bus/S.Bus2 port)
Power Supply
4 "AA" cells; optional 6V NiMH or 6.6V LiFe batteries

Receiver Specifications:

R3006SB 2.4GHz T-FHSS S.Bus
Type
Full-range flight receiver
Modes
S-FHSS or T-FHSS
Features
bi-directional communication with a T-FHSS transmitter to utilize an array of telemetry sensors, S.Bus and S.Bus2 ports, along with 6 standard PWM ports; Dual Antenna Diversity, Easy Link, High Voltage, Battery Fail Safe, Channel Mode
Voltage Input
4.8V-7.4V
Dimensions
1.7 x 0.98 x 0.35 in (43 x 25 x 8.8 mm)
Weight
0.3 oz (8.5 g)



6K V2 Manual - download here

Write a review

Please login or register to review

Futaba 6k V2

  • Brand: Futaba
  • Product Code: Tx - Futaba 6K V2
  • Availability: Available to Order, Please call
  • AerobatX Product ID: 1084
  • £225.00

  • Ex Tax: £187.50

Related Products

Fiala FM B170-FS

Fiala FM B170-FS

Fiala - 4 stroke gasoline boxer engine , 170ccm Displa..

£2,420.68 Ex Tax: £2,017.23

Cyano - BSI101 - INSTA-CURE - Super Thin Cyano - 1/2 oz

Cyano - BSI101 - INSTA-CURE - Super Thin Cyano - 1/2 oz

Water thin viscosity means that Insta-Cure will wick deep into a joint by capillary action and se..

£4.50 Ex Tax: £3.75

Cyano - BSI102 - INSTA-CURE - Super Thin Cyano - 1 oz

Cyano - BSI102 - INSTA-CURE - Super Thin Cyano - 1 oz

Water thin viscosity means that Insta-Cure will wick deep into a joint by capillary action and se..

£6.50 Ex Tax: £5.42

Fiala FM B140-FS

Fiala FM B140-FS

Fiala - 4 stroke gasoline boxer engine , 140ccm Displacement cc 140 ..

£2,285.44 Ex Tax: £1,904.53

Spektrum - DX20 20-Channel DSMX TX w/AR9020 RX

Spektrum - DX20 20-Channel DSMX TX w/AR9020 RX

Key FeaturesCarbon fiber front caseMachined-aluminum, quad-bearing gimbalsErgonomic leather side gri..

£0.00 Ex Tax: £0.00

Tags: 6k, futaba, v2