Picture above may not represent the actual components - see list below

Equipment set for XL models. Includes - Motor, ESC, Prop, Servos required to complete.

Suitable e.g. for:

Yak XL

Edge XL

Veloxity

Motor x1 : Kavan 3536/1000 ( same specs as 2814-1000kv T-motor)

Powering LiXX cells 3 - 4

RPM/V [ot./min/V] 1000

Max. power (180 s) [W] 700

Internal resistance [mOhm] 35

Open-circuit current (při 10 V) [A] 1.5

Max. peak current (180 s) [A] 50

Diameter [mm] 35.2

Length [mm] 34

Length celková [mm] 54.5

Shaft diameter [mm] 5

Weight [g] 107

Poles count 14

Timing [°] 20 - 25

ESC [A] 50 - 60

Weight of glider (up-to) [g] 1700

Weight of trainer (up-to) [g] 1600

Weight of acrobat (up-to) [g] 1300

Weight of 3D (up-to) [g] 1050

Volta D14 SERVO x4

weight: 14 g

size: 23x12x27,3 mm

operating voltage: 4,8 - 6 V

speed: ≤0.09sec / 60 st.

torque: 2kg-cm

connector JR

cable length 200 mm

metal gears

Prop - APC 11 X 4.6 SLOWFLY x1

1 x Volta 50 A esc :

Volta 50A G2 powerful ESC for Outdoor category aircraft models with a wingspan of 1M and more. The Volta 50A G2 uses powerful and reliable low-resistance MOSFETs and a 32-bit processor for fast motor response and trouble-free operation even at high RPM. The ESC is equipped with a number of protection functions such as protection during motor start-up, protection against overheating, shutdown in case of low input voltage or loss of control signal.

The Volta 50A G2 ESC has a switched BEC with an adjustable output of 5-6V and a current of up to 4A. Supports 2-4S Lipo battery power and 50A continuous current (60A peak).

Key Features

Constant/burst current: 50A/60A

Number of cells: 2-4S Lipo

Weight: 37g

BEC: 5-6V/4A

Dimensions: 68x25x10mm

Programmable parameters